Garbage Collection Tricycle

Garbage Collection Tricycle
Details:
The garbage collection tricycle is designed for sanitation scenarios. The carriage can accommodate a certain amount of domestic garbage, small construction waste, etc., to meet the daily garbage collection and transportation needs of communities, streets and other areas, and help to carry out urban cleaning work efficiently.
Send Inquiry
Description
Send Inquiry

Product Introduction

Garbage collection tricycle is designed for sanitation scenarios. The carriage can accommodate a certain amount of domestic garbage, small construction waste, etc., to meet the daily garbage collection and transportation needs of communities, streets and other areas, and help to carry out urban cleaning work efficiently.

Production Details

 

Garbage collection tricycle It is equipped with a white flap, which can effectively cover the garbage, prevent the garbage from spilling and odor during transportation, keep the environment clean, and also facilitate the closed storage of garbage, improving the hygiene level of sanitation operations.

Garbage Collection Tricycle needs at least 7.5kw power to ensure normal driving on a 15° slope when fully loaded, while 8.2kw power can support its passing rate on an 18° slope to 100%, which is 40% higher than that of models below 7kw.
When the Garbage Collection Tricycle starts with a full load, the torque can control the vehicle's 0-10km/h acceleration time within 3.5 seconds.

1250ccgreen garbage collection tricycle
2150cc green garbage collection tricycle
3green garbage collection tricycle
4200cc green garbage collection tricycle

 

Product Features and Applications

Features

Garbage Collection Tricycle needs to complete 80-120 starts and stops per day (such as parking at a garbage bin and dumping garbage). The stable idle speed can reduce the wear of parts caused by engine idle vibration.

Applications

Garbage Collection Tricycle is a commercial vehicle equipped with a dual-start system. The rate of work delays due to starting failure is only 1.2%, which is much lower than that of single electric start vehicles (5.8%). It is especially suitable for the needs of garbage trucks working in the early morning (low temperature environment).

DUNYA Product Parameters

 

SUSPENSION Design Max Speed ≥60 km/h
Loading Capacity 800-1500 kg
Gross Weight 380 kg
Dimension(L*W*H) 3500*1300*1500mm
Cargo size(L*W*H) 1800*1300*1500mm
Battery 9A
Front Wheel Brake Drum
CHASIS ( FRAME) Keel (mm) 45*65 strong chasis
Track 870 mm
Wheel Base 1100 mm
Ground Clearance 180mm
Tire 5.0-12
SHOCK Brake Operation Mode(F/R) Drum
Front suspension Double Front shock absorber
Rear suspension Leaf spring 5(3+2) pieces
Transmission Type Shaft Drive
Rear axle Car Strength Driving rear axle
ENGINE Engine Type Single cylinder,4-stroke,camshaft downward, 250cc aircooling(optional)
Cool Type water Cooler
Fuel Tank Capacity 12 L(optional)
Min.Fuel Consumption <=350g kw.h
Rated Power&Rotating Speed 8.2kw/8500r/min
Max.Torgue/Rotating Speed 10.0N.m/7500r/min
Lowest No-Load Speed Stability 1500±150rpm
Clutch Method Manual-Hand
Ignition System C.D.I.
Starter Kick/Electric
Transmission 5 Forward &1 Reserse Gears
PACKING Loading Capacity (CKD) 26 Units in 40"HQ
Delivery Time (from loading port) 30-35 Days after receiving advance payment

 

Product Qualification

 

Production line layout: The company builds a special assembly line, which is divided into workstations such as frame assembly, power system installation, car assembly, and vehicle debugging. The frame is first fixed at the initial workstation, and the suspension, brakes and other chassis components are installed in turn.

Assembly process: At the power system workstation, the engine or motor, battery, etc. are connected to the frame, and the wiring harness and pipelines (oil circuit of fuel vehicles and circuit of electric vehicles) are arranged; then at the car station, the welded and painted car and frame are assembled through connectors (such as bolts and supports), and the car cover, locks, hydraulic struts (if there is an automatic loading and unloading function), etc. are installed; tires, lights, seats, etc. are installed at subsequent workstations, and the whole vehicle assembly is gradually completed.

 

FAQ

 

Q: How much garbage can be loaded?

A: The volume of the vehicle compartment is generally 2 - 3 cubic meters.

Q: What is the power of the garbage collection tricycle?

A: It is a gasoline-powered engine.

Q: How is the power and stability on a road with a large slope?

A: In terms of power, the fuel type has sufficient power and strong climbing ability.

Hot Tags: garbage collection tricycle, China garbage collection tricycle manufacturers, factory, Community Patrol Motorcycle, Fully Enclosed Tricycle, Garbage Collection Tricycle, Sanitation Vehicles, special needs tricycle, Trike Food Cart

Send Inquiry